6.1.2.2. Job Settings

• Setup Wizard

The Job Settings Wizard will guide you in filling in the required information depending on your type of Operation:

1. Pulverization
2. Fertilizing
3. Harvest
4. Planting
5. Irrigation
6. Others
   

*If you want the Job Settings Wizard not to appear the next time you turn on the IsoView, select the option “Don’t show this screen again”.

*The Job Assistant can also be found on some screens represented by the touch button .

1. Follow the wizard step-by-step and fill in all the requested data.

Step	Action
1	select the button to start the configuration, or select the button to exit and access the Main Menu.
2	Enter a Machine Name/Model and proceed to the next screen .
3	Enter a Machine Operator Name and proceed to the next screen .
4	Continue selecting the desired options using the buttons e or touch the desired option on the screen with your finger.
5	Advance to the next screen or, if necessary, return to the previous screen .
6	Fill in the requested information on each screen..

Details of information filled in.

2. When completed, the following screen will be displayed.:

In this step, you configured the work parameters related to one of the types of Operation:

• Pulverization
• Fertilizing
• Harvest
• Planting
• Irrigation
• Others
  

3. Confirm your choices on this screen.

Step	Action
1	select the button to confirm and save the settings.
2	Or, if necessary, return to the previous screen .

*Congratulations, you have completed filling in all the data requested by the Setup Wizard and is ready to start its operation!