The system IsoView with the operating license of Navigation I left the factory in a sealed suitcase with the necessary protections for transport, but as we know, accidents can occur during transport/storage and our factory protection may not be enough for these extremes. We therefore recommend checking the status of all components before starting the installation..
| Step | Action |
|---|---|
| 1 | Check that the delivered components are in accordance with the invoice. |
| 2 | Check whether there has been any damage due to transport and, if so, notify those responsible. |
| 3 | The packaging material must be disposed of in accordance with the environmental regulations of each country. If you cannot send the material for recycling, ask the Dealer’s technician to carry out this procedure at your headquarters.. |
| 4 | Place all components on a clean surface where you can see them.. |
| 5 | Check the contents of the case as described in the chapter System Components. |
Copyright © 2025 Agres Sistemas Eletronicos
—
Powered by 