8.2.17. Coupling Distance – Implement Wheel

*Screen type = Value Editing with Figure

*decimal places = 2
Minimum value = 0.30 m
Maximum value = 20.00 m

The Hitch Distance – Implement Wheel parameter defines the distance in meters, measured on the tractor’s longitudinal axis, between the tractor’s hitch point for trailing implements and the center of the implement wheel. In conjunction with the other two parameters – Distance Antenna – Coupling e Coupling Distance – Bar, the system IsoView builds drawbar implement geometry displayed graphically on the navigation screen.

The presence of the parameter Coupling Distance – Implement Wheel in the Work menu is conditioned to the configuration of the parameter Coupling Type as drawbar.

The image below shows the configuration screen of the parameter Coupling Distance – Implement Wheel, containing the self-explanatory figure of its meaning.