IMPORTANT NOTE: If you are performing a Rolling Thermal Scan and a Static EMG scan on the same patient, perform the Rolling Thermal Scan first. This will ensure that the lowered skin temperature that results from the alcohol wipe does not affect the thermal readings.
Open the scanning window by clicking on the Run a Scan icon.
Once the patient has been selected, you check the Scan Settings, which will allow you to change the examiner and the Test Protocol you want to use. Once you have selected the Test and Examiner you are ready to run the scan.
Dip the sEMG sensors in alcohol, place them on the patient’s skin and select Start Scan.