Room height

The height of the room can be displayed by using the room height command.

*This command can only be used when connected to Flexijet.

How to use it:

• Select the command ‘Room Height” from the measurement ribbon.
  
• Click where you want the height to be displayed on the drawing. ( This has to be done on a 2D folder with a plane. )

• The command window will prompt you to measure the first point. You can do this by clicking on the drawing or measuring with Flexijet.
  
• Now, click/measure the second point.
  
• The height will be displayed on the spot that you selected.