PLC Developers Guide / PLC I/O Mode Control / PLC Outputs for PLC I/O Mode / Set Port Input Mask /
ConveyLinx-Ai Family
Set Port Input Mask |
ConveyLinx ERSC ❌ | ConveyLinx-Ai 24V ✅ | ConveyLinx-Ai 48V ✅ |
 |
 |
 |
|
| ConveyLinx-ECO ❌ | ZPA Mode ❌ | PLC I/O Mode ✅ | |
 |
 |
 |
| Register Name | Internal Address | Assembled PLC Address | Description | ||
| Set Sensor Port Input Signal Condition Mask |
4:0034 | M: 4:1819 E: O.Data [19] P: Byte 38 (Hi) P: Byte 39 (Lo) |
Bitwise Value | ||
| Bit 00 = | Left Sensor Port – Aux I/O (M8 Pin 2) | ||||
| Bit 01 = | Reserved | ||||
| Bit 02 = | Right Sensor Port – Aux I/O (M8 Pin 2) | ||||
| Bit 03 = | Reserved | ||||
| Bit 04 = | Left Sensor Port – Sensor Signal (M8 Pin 4) | ||||
| Bit 05 = | Reserved | ||||
| Bit 06 = | Right Sensor Port – Sensor Signal (M8 Pin 4) | ||||
| All other Bits reserved | |||||