| Selecting the pull-down box for ZPA Mode will show the available selections. Singulation is the default configuration |
![]() |
*Selecting a new setting from the ZPA Mode drop down box immediately changes the zone’s mode. If you want to set all Upstream zones for the range of nodes entered in the Node No. text boxes, then click the Set All button. Similarly, you can do the same operation in the “Downstream Zone” portion of the main screen.
*Singulation Release Mode is the default setting and it is described in the Default Settings and Operation section
*Please note that Singulation and Train Release Modes are configurable per Zone and can be mixed on the same network
