All assembly pairs can be connected to a single ConveyLinx-Ai Family Modules using the same procedure within RSLogix 5000 environment:

  1. Create a New Module in your Ethernet Tree
  2. Select Generic Ethernet Module from the list of devices
  3. Enter name and I.P. Address
  4. Select the correct Comm Data type
  5. Enter Input Assembly Instance Value and Size
  6. Enter Output Assembly Instance Value and Size
  7. Enter desired RPI value

For example if you need to attach to 5 ConveyLinx-Ai Family Moduless that are in ZPA Mode, each module will have to have a unique name and I.P. address (step 3) and steps 4, 5, 6, and 7 will use the same values for each ConveyLinx-Ai Family Modules.