• English
    • EspaƱol
ATevo O&SI - 3PH Input (16-1000 Adc)
1.1
  • 1.2
  • 1.1
Table of Contents
ATevo O&SI - 3PH Input (16-1000 Adc)
  • 1.1
    • ATevo O&SI - 3PH Input (16-1000 Adc) — 1.2
    • ATevo O&SI - 3PH Input (16-1000 Adc) — 1.1
GrabGrab
GrabGrab
  • 1. Receiving & Mounting
    • 1.1. Storing ATevo
    • 1.2. Receiving ATevo
    • 1.3. Unpacking & Inspecting ATevo
    • 1.4. Reporting Damage or Shortage
    • 1.5. Returning Damaged Equipment
    • 1.6. Moving ATevo
    • 1.7. Mounting ATevo
      • 1.7.1. Floor-Mounting (all enclosures)
      • 1.7.2. Wall-Mounting (Style-5070)
      • 1.7.3. Rack-Mounting (Style-5070)
  • 2. Wiring
    • 2.1. Mechanical Diagram and Component Location
      • 2.1.1. Main Control Board (A1)
      • 2.1.2. Power Board (A2)
      • 2.1.3. Auxiliary I/O Board (A4) – optional
      • 2.1.4. Filter Capacitor Board (A7) or Capacitors (C1x)
      • 2.1.5. AC MOV Board (A9)
      • 2.1.6. Serial Communications Adapter (A12) – optional
      • 2.1.7. Forced Load Sharing Comm Adapter (A13) – optional
      • 2.1.8. Ethernet Communications Adapter (A22) – optional
      • 2.1.9. Eliminator Capacitor (C2) – optional
      • 2.1.10. AC Input Circuit Breaker (CB1)
      • 2.1.11. DC Output Circuit Breaker (CB2)
      • 2.1.12. Main Filter Inductor (L1)
      • 2.1.13. Secondary Filter Inductor (L2)
      • 2.1.14. Power Isolation Transformer (T1)
    • 2.2. Removing Protective Safety Shield
    • 2.3. Retapping Power Isolation Transformer
    • 2.4. Making AC Input Connections
    • 2.5. Making DC Output Connections
    • 2.6. Remote Voltage Sense
    • 2.7. Wiring ATevo Common Alarm
    • 2.8. Wiring Relays on Auxiliary I/O Board
    • 2.9. Wiring Temperature Compensation Probe
    • 2.10. Wiring Serial Communications Adapters
    • 2.11. Wiring Ethernet Adapter
  • 3. Controls & Navigation
    • 3.1. Front Panel Controls & Indicators
    • 3.2. Display
      • 3.2.1. Home Screen
      • 3.2.2. Configuration Screens
      • 3.2.3. Status Screens
      • 3.2.4. Hindle Health System Screens
      • 3.2.5. Other Screens
    • 3.3. Main Menu & Navigation
      • 3.3.1. Menu and Arrow Buttons
      • 3.3.2. EDIT/ENTER Button
      • 3.3.3. Navigation Conventions in this Manual
      • 3.3.4. Escape (ESC) Button
  • 4. Startup & Configuration
    • 4.1. Startup
      • 4.1.1. Understanding the Startup Sequence
      • 4.1.2. Factory Settings Tables
      • 4.1.3. Checking Installation
      • 4.1.4. Starting Up
      • 4.1.5. HOME Screen
    • 4.2. Configuring Basic Set Points & Alarms
      • 4.2.1. How to Configure General Parameter Settings
      • 4.2.2. Setting Float Voltage
      • 4.2.3. Setting Equalize Voltage
      • 4.2.4. Setting Equalize Timer
      • 4.2.5. Setting High DC Alarm Voltage
      • 4.2.6. Setting Low DC Alarm Voltage
      • 4.2.7. Setting Current Limit Level
    • 4.3. Configuring Advanced Set Points & Alarms
      • 4.3.1. How to Configure Advanced Settings
      • 4.3.2. Setting High Voltage Shutdown
      • 4.3.3. Setting High Level Detect
      • 4.3.4. Setting Low Voltage Level Detect
      • 4.3.5. Setting Ripple Alarm
    • 4.4. Configuring System Settings
      • 4.4.1. How to Configure System Settings
      • 4.4.2. Setting System Time
      • 4.4.3. Setting System Date
      • 4.4.4. Setting Display Backlight Control
      • 4.4.5. Setting Display Contrast
      • 4.4.6. Setting Display Backlight Intensity
      • 4.4.7. Setting Display Reverse Image Control
    • 4.5. Configuring Relays
      • 4.5.1. Configuring Common Alarm Relay
      • 4.5.2. Configuring Auxiliary I/O Board Relays
    • 4.6. Disabling Alarms in Common Alarm List
    • 4.7. Configuring Serial Communications Adapter
    • 4.8. Configuring Ethernet Adapter
    • 4.9. Enabling/Disabling High Level Detect
    • 4.10. Configuring Ground Alarms
      • 4.10.1. Setting Up Ground Fault Alarm Sensitivity
      • 4.10.2. Setting Up Ground Imbalance Alarm
    • 4.11. Configuring Battery Settings
      • 4.11.1. Selecting Battery Type
      • 4.11.2. Setting End of Discharge (EOD) Alarm
      • 4.11.3. Setting Up the Battery Temperature Probe
  • 5. Basic Operation
    • 5.1. ATevo Operating Modes
      • 5.1.1. Changing Display Mode
      • 5.1.2. Changing Charge Mode
      • 5.1.3. Changing Equalize Method
      • 5.1.4. Lamp Test & Display of Firmware Versions
      • 5.1.5. Resetting Latched Relays (legacy method)
    • 5.2. High Voltage Shutdown
    • 5.3. Low Level Detect
    • 5.4. High Level Detect
    • 5.5. Disabling Ground Detection
  • 6. Advanced Operation
    • 6.1. ATevo Main Menu
    • 6.2. Alarms Button
    • 6.3. Health Button
    • 6.4. Security & Passwords
      • 6.4.1. Three (3) Levels of Password Protection
      • 6.4.2. Access Security Features & Configure Passwords
      • 6.4.3. Setting Passwords
      • 6.4.4. Setting Default Permission
      • 6.4.5. Logging into a Password Authorization Level
      • 6.4.6. Logging Out
    • 6.5. SD Memory Card Features
      • 6.5.1. Installing SD Memory Card
      • 6.5.2. Storing Event Log File to SD Card
      • 6.5.3. Storing/Recalling Settings to/from Memory Card
      • 6.5.4. Upgrading Firmware via Memory Card (v2.6.6 & earlier)
      • 6.5.5. Upgrading Firmware via Memory Card (v2.7.0 onward)
  • 7. Alarms & Indicators
    • 7.1. Legacy AT30 Alarms & Indicators
    • 7.2. Common Alarm Indicator & Other Alarm Triggers
    • 7.3. Alarm LED Summary Table
    • 7.4. Viewing Alarms
    • 7.5. Advanced Alarms
    • 7.6. Resetting Latched Alarm Relays
    • 7.7. Battery Open Test
      • 7.7.1. Battery Open Test Settings
      • 7.7.2. Running Battery Open Tests Periodically
      • 7.7.3. Running Battery Open Test Manually
      • 7.7.4. Resetting Battery Open Alarm
    • 7.8. AC Metering – optional
    • 7.9. Battery Discharge Alarm / Meter – optional
  • 8. Hindle Health System
    • 8.1. Hindle Health System – Overview
    • 8.2. Hindle Health System – Components
    • 8.3. Hindle Health System – Screens
    • 8.4. Hindle Health+ – optional
  • 9. Event Logs
    • 9.1. Event Log Types
    • 9.2. Viewing Event Log
    • 9.3. Viewing Hindle Health Log
    • 9.4. Clearing Event Logs
    • 9.5. Copying Event Logs to SD Memory Card
  • 10. Battery Temperature Compensation
    • 10.1. ATevo Battery Temperature Compensation
    • 10.2. Installing the TempCo Option
    • 10.3. Using the TempCo Option
    • 10.4. Temperature Compensation Curves
  • 11. Remote Sense
    • 11.1. ATevo Remote Voltage Sense
    • 11.2. Remote Sense Connection
    • 11.3. Procedure for Wiring Remote Sense
    • 11.4. Configuring Remote Sense Jumpers
    • 11.5. Disabling Remote Sense
    • 11.6. Enabling Remote Sense Compensation
  • 12. Auxiliary Inputs/Outputs
    • 12.1. Auxiliary Input/Output (I/O) Board
      • 12.1.1. Relays
      • 12.1.2. Binary Inputs
      • 12.1.3. Analog Inputs
    • 12.2. Connections to Auxiliary I/O Board
      • 12.2.1. System Connections
      • 12.2.2. Wiring Relay Connections
      • 12.2.3. Wiring Binary Input Connections
      • 12.2.4. Wiring Analog Input Connections
    • 12.3. Hardware Configuration
    • 12.4. Software Configuration for Relays
      • 12.4.1. Auxiliary I/O Board Relay Configuration
      • 12.4.2. Auxiliary I/O Board Relay Alarm Configuration
      • 12.4.3. Auxiliary I/O Board Relay Latch Configuration
      • 12.4.4. Auxiliary I/O Board Relay Time Delay Configuration
      • 12.4.5. Factory Default Alarm Relay Configuration
    • 12.5. Software Configuration for Binary Inputs
      • 12.5.1. Binary Input Configuration
      • 12.5.2. Binary Input Name Assignment
      • 12.5.3. Binary Active State Assignment
      • 12.5.4. Binary Input Alarm Enable
      • 12.5.5. Binary Input Action Assignment
      • 12.5.6. Factory Default Binary Input Configuration
    • 12.6. Software Configuration for Analog Inputs
      • 12.6.1. Analog Input Configuration
      • 12.6.2. Analog Input Name Assignment
      • 12.6.3. Analog Input Primary Unit Assignment
      • 12.6.4. Analog Input Scaling Assignment
      • 12.6.5. Analog Input Alarm and Trigger Assignment
      • 12.6.6. Analog Input Alarm Threshold Assignment
      • 12.6.7. Analog Input Action Assignment
      • 12.6.8. Factory Default Analog Input Configuration
  • 13. Forced Load Sharing
    • 13.1. Forced Load Sharing – Introduction
    • 13.2. Forced Load Sharing – System Requirements
    • 13.3. Forced Load Sharing – Configuration
    • 13.4. Wiring ATevo Chargers for Forced Load Sharing
      • 13.4.1. Configuring ATevo for Forced Load Sharing
    • 13.5. Forced Load Sharing Operation
      • 13.5.1. Requirements to Maintain Forced Load Sharing
      • 13.5.2. Virtual Independent Mode
      • 13.5.3. Forced Load Sharing Alarms
    • 13.6. Temperature Compensation with Forced Load Sharing
    • 13.7. Battery Open Alarm for Forced Load Sharing
    • 13.8. Timed Equalize with Forced Load Sharing
    • 13.9. Auto-Equalize with Forced Load Sharing
    • 13.10. Firmware Updates with Forced Load Sharing
    • 13.11. Troubleshooting Forced Load Sharing ATevos
  • 14. Maintenance
    • 14.1. Performing Routine Maintenance
    • 14.2. Ordering Replacement Parts
    • 14.3. Replacing Defective Components
      • 14.3.1. Removing Safety Shield
      • 14.3.2. Replacing Main Control Board (A1)
      • 14.3.3. Replacing Serial Communications Adapter (A1#)
      • 14.3.4. Replacing Ethernet Adapter (A22)
      • 14.3.5. Replacing Rectifier / Heat Sink Assembly (A6)
      • 14.3.6. Replacing Power Board (A2)
      • 14.3.7. Replacing Auxiliary I/O Board (A4)
      • 14.3.8. Replacing Filter Capacitor Board Assembly (A7 or C1x)
      • 14.3.9. Replacing Eliminator Filter Capacitor (C2) – optional
      • 14.3.10. Replacing Circuit Breakers (CB1/CB2)
      • 14.3.11. Replacing Power Isolation Transformer (T1)
      • 14.3.12. Replacing DC Power Supply (P/S-A2)
      • 14.3.13. Replacing MOV Surge Suppressor Board (A9)
  • 15. Appendices & Drawings
    • 15.1. Appendix A – Specifications
    • 15.2. Appendix B – Documentation & Drawings
      • 15.2.1. Manuals & Technical Documents
      • 15.2.2. Complete Standard Drawings Binders
        • 15.2.2.1. Enclosure Outline Drawings
        • 15.2.2.2. Internal Component Layout Drawings
    • 15.3. Appendix C – Document Control Information
  • 16. Firmware v2.7.0 Enhancements
    • 16.1. Alarm Triggers
    • 16.2. Disable Equalize
    • 16.3. Menu Changes
  • 17. Safety Instructions
    • 17.1. Safety Symbols
    • 17.2. Equipment Misuse
    • 17.3. DANGER
    • 17.4. WARNING
    • 17.5. CAUTION
  • 18. Warranty
Download as PDF

2. Wiring

1.7.3. Rack-Mounting (Style-5070)
2.1. Mechanical Diagram and Component Location


SECTION TOPICS
Mechanical Diagram and Component Location
Removing Protective Safety Shield
Retapping Power Isolation Transformer
Making AC Input Connections
Making DC Output Connections
Remote Voltage Sense
Wiring ATevo Common Alarm
Wiring Relays on Auxiliary I/O Board
Wiring Temperature Compensation Probe
Wiring Serial Communications Adapters
Wiring Ethernet Adapter

*Download our Quick Setup Sheet for a checklist containing graphical instructions on placement, wiring, startup, & configuration.

Last modified: 8 September 2023
1.7.3. Rack-Mounting (Style-5070)
2.1. Mechanical Diagram and Component Location
Copyright HindlePower Inc. 2024