The ATevo is the second generation of the AT Series microprocessor-controlled float battery chargers. Because its configuration button sequence is identical, users of legacy AT30 chargers will easily adapt to ATevo. This section details how to configure basic ATevo set points and alarms found also on legacy AT30 chargers. The process is shown by both (1) video and (2) instructions with screenshots.
Instructions by Video
Instructions with Screenshots (see subsections below)
- How to Configure General Parameter Settings
- Setting Float Voltage
- Setting Equalize Voltage
- Setting Equalize Timer
- Setting High DC Alarm Voltage
- Setting Low DC Alarm Voltage
- Setting Current Limit Level
Last modified:
8 September 2023