Unless otherwise specified, the ATevo Auxiliary I/O Board (A4) will ship from the factory with the following binary input configuration:
| Factory Default Binary Input Configuration | ||||
|---|---|---|---|---|
| Binary Input | Name | Alarm State | Action | Active State |
| |
BI1-1 | disabled | none | high |
| |
BI1-2 | disabled | none | high |
| |
BI1-3 | disabled | none | high |
| |
BI1-4 | disabled | none | high |
The factory-default voltage jumper-setting, for all binary inputs is 130Vdc.
Last modified:
20 February 2024