|Do not install ATevo outdoors, or in wet or damp locations, unless specifically equipped for that environment.
|Remove all jewelry, watches, rings, etc. before proceeding with installation or servicing to avoid electrical shock hazards.
|Do not operate ATevo with any power source that does not match the specified ac and dc voltage ratings. Refer to the data nameplate decal affixed to the outside panel for operational requirements.
|Do not operate ATevo with the safety shield or any other supplied guards removed or improperly installed.
|Do not operate ATevo if it has been damaged in any way. Refer to qualified service personnel.
| Before using ATevo, read all instructions and cautionary
markings on: a) this equipment, b) battery, and c) any other equipment to be used in conjunction with ATevo
|Do not use ATevo for ANY purpose not described in this manual.
|Turn OFF ATevo before connecting or disconnecting the battery to avoid electrical shock hazards, arcing, burning, and/or equipment damage.
|De-energize and lock out all ac and dc power sources to ATevo before servicing.
|Do not disassemble ATevo. Only qualified service personnel should attempt repairs. Incorrect reassembly could result in explosion, electrical shock or fire.
Last modified: 10 May 2023
Need more help with this?
Don’t hesitate to contact us here.
Thanks for your feedback.