Prior to powering up ATevo for the first time, it is recommended that:
- You have followed installation instructions carefully.
- You check that ac input supply voltage and battery voltage match information on ATevo nameplate.
- If ATevo features the Multi-Tap option, verify the ac input jumpers on INPUT VOLTAGE SELECTION terminal block are correct for the ac supply voltage (see Section 2.3.2, Verifying Multi-Tap AC Input Voltage Setting).
- Open the front panel, and check battery polarity at the DC Output Circuit Breaker (CB2+/-).
Last modified:
3 August 2023
Need more help with this?
Don’t hesitate to contact us here.