11.5. Disabling Remote Sense

If you need to temporarily disable Remote Sense:

• De-energize and lock out all ac and dc voltages within the ATevo enclosure.
• Check with a voltmeter.
• Remove the safety shield.
• Move SHORTING BLOCKs to Local Sense configuration per Section 11.4.3.
• Replace safety shield and close front panel door.
• Re-energize ATevo.
  

*If Remote Sense is to be disabled for extended periods of time or permanently disabled, it is highly recommended that the sense leads (the twisted pair cable) be disconnected from both the battery and terminal block (A2-TB1).