2.3.1. Determining if Multi-Tap Option is Present

Check the ATevo nameplate. If the ac input voltage is listed as 120/208/240 or 115/220/240 Vac, the ATevo is equipped with the multi-tap option. If the nameplate is not visible:

• Open the ATevo front panel door.
• Behind the safety shield, look for a gray terminal block directly
  above the AC Input Circuit Breaker (CB1).
  • Reference the input voltage selection silk-screened on the
    center-right of the safety shield.
  • If this terminal block is present, the ATevo is equipped with
    the multi-tap ac input voltage option.