2.5.3. Sensors

The Sensors tab contains an overview of all vehicles in a garage, equipped with cameras and people sensors.

Information from the vehicle regarding the following topics can be seen:

• Vehicle status
  • Running, unknown or time since last report
• Number of cameras
  • If a vehicle contains more than six cameras, a number is shown next to a single camera icon instead.
• Number of disks
  • If a vehicle contains more than four disks, instead a number is shown next to a single disk icon.
• Number of people counters
  • If a vehicle contains more than four people counters, instead a number is shown next to a single people counter icon.
• Any alarms from devices
  • Orange triangles represent minor issues, such as time errors. Red exclamation points indicate more severe issues, such as memory failure.

Normally a vehicle will display one disk per camera, except for units such as the AXIS F34 NVR, which may have up to four camera lenses connected.
In the image above, an example of this can be seen in the vehicle 5757.

Located at the bottom of the list, a box for multi vehicle operations can be found, which contains options for the following commands:

• Fetching the inventory from a vehicle, a function that reports what devices (cameras, people counters and disks) a vehicle contains and their status.
• Fetching all people counter configuration from a vehicle
• Requesting the privacy image from all people counters in a vehicle