RTV Server Settings

In order to use Controller Tester RTV, you need to add a target server with Controller Tester RTV server installed.
The target server can be added in [Window] -> [Preferences] -> [Target Server].

Add a target server

1. Click [Add] in [Window] -> [Preferences] -> [Target Server].
   

2. In the [Add Target Server] window, enter the target server information.
   

!The server name only accepts characters that can be used as Windows file names and can not be modified after adding the target server.

3. Click the [Connection Test] button to check the connection status with the target server you entered.
   

4. If the connection test with the target server is successful, click the [OK] button to add the target server.
   

5. You can see that the target server has been added.
   

Edit a target server

1. Double-click the server in the target server list, or select the server and click the [Edit] button.
   

2. On the [Edit target server] window, edit the server information and then click [OK].
   

3. You can see that the target server information has been edited.
   

Remove a target server

If you no longer use the target server, you can remove it.
When you remove a target server, the toolchain or project resources associated with the target server are deleted from the client environment(Can not be deleted if a target toolchain added from that target server exists).

1. Select a server from the list of target servers and click the [Remove] button.
   

2. Click the [OK] button in the [Remove Target Server] window(Depending on the size of the target server resource, it may take a minute or two).
   

3. You can see that the target server has been removed.