Sensor Debounce setting is the time the logic holds the state of its Sensor inputs after a change of state. Keep in mind this is not a delay prior to detecting a carton when it first blocks the sensor.
| The module will detect the leading edge of a carton and hold this state for the Sensor Debounce time period. Similarly, when the trailing edge of the carton clears the sensor, the logic holds this state for the Sensor Debounce time period |
![]() |
*The ConveyLinx Module keeps a running count of the number of changes of state that have occurred during the Sensor Debounce Time window even though the logic is ignoring these state changes. This running value is called the Flicker Counter and it can be viewed on the Diagnostic Window
| Enter the desired value in seconds and click the Set button. The default is 0.1 seconds and the valid range is 0 to 2 seconds. Please note this setting applies to both the Left and Right Sensor ports. In our example we entered 0.2 seconds. The Set All button will apply these same settings for the range of modules indicated at the top of the dialog |
![]() |
