Using a Crepe Ring Safely

ENSURE YOUR ARMS DON’T TOUCH THE CREPE RING AT ANY TIME.
We advise you only wear long sleeve tops when making crepes

*Maintenance and Cleaning *

Before cleaning your appliance, unplug it and let the griddle cool down.
Read the general rules applicable to electrical equipment before any action on the appliance.

The frame
Clean the frame with a sponge dipped in warm water and liquid detergent unchlorinated. Never use abrasive products or metallic brushes.
Do not clean the appliance under flowing water. Do not immerse the appliance.
Due to the high temperatures heat, it is normal for the stainless steel can to become brown with time.

The griddle
After use, simply wipe the griddle with the cleaning pad Krampouz; do not wash it. CAREFUL: never suddenly cool plates.

Preparing crepes requires a contribution of fat on the griddle. – Lubricating
- Fat in the batter according to recipes
These fats will gradually thicken the initial seasoning. Avoid seasoning that does become too thick because:
- It acts as an insulator and interferes with the cooking.
- It is flaking off or giving the impression that the metal disintegrates.
Therefore the strip regularly uses the abrasive stone APA1 Krampouz.
If the seasoning is too thick default regular stripping, it is possible stripping plate by blasting (contact our customer service).
After these operations must be redone a seasoning as for a new product.

Work surface
Choose an easy-to-clean work surface on which to install the appliance. The appliance must be at least 20 cm from any vertical surfaces that are not heat-resistant in order to prevent damage by heat radiating from the plates. To ensure maximum ease of use, the top of the irons should be
between 85 and 95 cm from the ground.

General rules applicable to electrical equipment

When using electrical appliances, safety precautions must
always be taken:
Read all the instructions carefully.
▪ This appliance is not designed for use by people (including children) whose physical, sensorial or mental capacities are impaired or by people with no experience or knowledge, unless they have been supervised or given training in the use of the appliance beforehand by a person responsible for their safety. Close supervision is necessary when an appliance is used by children, or in their presence.
▪ The appliance must never be left without supervision during use.
▪ Do not use the appliance for anything other than the purpose which is described.
▪ There is a risk of accidents if accessories are used that are not recommended by the manufacturer of the appliance.
▪ The appliance must be earthed.
The appliance must be connected to the mains by means of a residual (differential) current device with a rated residual operating current of 30mA maximum.
▪ It is recommended to use this appliance in an environment that does not exceed a temperature of 40°C.
▪ It is recommended to examine the power supply cable regularly in order to detect any signs of deterioration.
▪ Do not connect nor use any appliance with a damaged plug or cable. If the power supply cord is damaged, it must be replaced by the manufacturer, its after-sales service or a similar qualified person to avoid any danger.
In case of failure, the examination and repair should be performed by a qualified technician.
▪ All maintenance must be performed by a qualified technician.
▪ If a fixed machine has a cordon without plug, a legal way to disconnect it shall be planned in the installation.
▪ The appliance is not designed to be switched on by an external timer or separate remote control system.
▪ If you need to use an extension lead, take care to unwind the whole length in order to avoid the cable overheating.
▪ Always connect or disconnect the cable to the power socket with the setting knob set at a minimum and ‘off’ position.
In order to avoid electric shocks, do not immerse the cable, socket or body of the appliance in water or any other liquid. Do not handle with wet hands either.
▪ Do not let the cord hang over the edge of a table or counter.
Do not put the appliance nor its cable on or near a hot surface (electric hotplate, hot gas burner, heated oven etc).
▪ Disconnect the plug when the appliance is not in use or before cleaning.
▪ The appliance must not be cleaned with a high or low pressure jet.
▪ Do not bleach.
▪ Do not handle the appliance while hot. ▪ Do not touch the hot surfaces.
▪ Leave the appliance to cool prior to handling or cleaning it. ▪ This device is prohibited outside.
Place the appliance on a dry and stable surface, and slightly back from the edge and at least 20 cm from any wall or element liable to be affected by heat.
▪ Take care: Do not insert a sheet of tin foil or any other material or object (risk of damage) between the plate and the frame (ventilation area).
▪ Do not block the ventilation holes of the plastic base, under the frame.
Caution: Do not use this device with wood or coal to other energy source than that for which it provides (electrical energy).
▪ We recommend you keep the original packaging in order to store the appliance.
KEEP THESE INSTRUCTIONS