Testing & Checking

1. Open the POS Program

2. Login by Entering 101 and press Enter for POS 1
- 202 for POS 2
- 303 for POS 3

3. The Cash drawer should Open and a Receipt should be printed from the receipt printer – Make sure the correct Logo is printed!

1. Ask the Staff to do a test Transaction using the EFT as a payment method.
- Scan at least two items in the test Transaction.
- You DO NOT need to complete the transaction, stop the transaction when the amount shows on the EFT.

2. Ask the staff to check the balance on an empty oneCard. This is referred to as a Saldo check in some countries.

3. If all Tests are OK the POS installation is Complete and you can proceed to the next Topic in the Guide.

12. Do you have another POS to install?

- If you encounter any problems with the above please call the Technician Hotline at:

- Technician Hotline : + 45 99 42 43 40