Setup Epson Label Printer

1. Open EpsonNet Config

2. Log in by using:
User: .\administrator
Password: P@sSw0rD

3. Press Refresh and wait 20 sec. for the Label Printer to show.

4. Click on the Printer Called TM-L90.

5. Go to TCP/IP > Basic

6. REMOVE the Checkmark in Set using PING and enter the Correct IP information for the Label Printer.
- IP information:
IP: XXX.XXX.XXX.30
Subnet: 255.255.255.0
Gateway: XXX.XXX.XXX.1
- Replace XXX with the IP info you get from running a ‘‘ipconfig’‘ in CMD.

7. Press Transmit, followed by Ok and Ok