Label printers installation

!We will have to install a Zebra ZD420 Label printer at the ‘Back Office’
We have to install the Epson label printer ‘POS desk’.

EPSON

1. Locate and Unpack the Epson label printer.

2. Take the Epson Printer with power cable to the cash-desk.

3. Find a suitable place to place the EPSON printer. On a shelf at the counter, or possibly up on the desk itself.

4. Connect the power cable to a power strip at the bottom of the cash-desk..

5. Connect an internet cable to an ethernet socket or an switch/hub. (Note the number because we need it for later)

ZEBRA
1.Locate and Unpack the Zebra Label Printer.

2. Connect the Label Printer to Power and LAN. (Use the LAN cable from the old epson connection)

3. Turn on the Zebra printer.
l;

!Please call the Technician hotline to get the Zebra printer configured.
- New Shop / Renovation : + 45 99 42 43 40
- Planned Hardware Exchange : + 45 99 42 43 40