Base Plate

Mounting the POS

1. Connect the USB C Cable to the Bottom of the POS PC.
- Then place the POS PC on the desk.

Connecting Peripherals

2. Unpack the Barcode Scanner and the Stand.
- Place the Barcode Scanner and Stand on the Desk

3. Unpack the Epson Receipt Printer and the USB cable.

4. Connect the USB cable and the Power Supply to the Bottom of the receipt printer.
- Remember to put the lid back on.
- Connect it to power.

5.Take the Paper from the old Receipt Printer and put it in the new Receipt Printer.
- Ask the staff for some receipt paper if needed.
- Now place the receipt printer on the desk.

6. Unpack the Customer Display
- Place the Customer Display on the Desk.

7. Unpack the Cash Drawer and pull the Preinstalled Cable from the Cash Drawer to the Receipt Printer and connect it as shown below.
- Put the Cash draw in the Desk.

Connecting Cables to the Connectivity HUB

8. Pull all Cables through the Desk to where the Connectivity HUB will be placed.

9. Connect a Black LAN Cable from where the Connectivity HUB will be placed to a LAN outlet in the desk.
- Make sure that the LAN socket is Patched in the Back office.

10. Connect all Cables to the Connectivity HUB

A – Power Supply
B – USB C to POS PC
C – Barcode Scanner
D – Epson Receipt Printer
E – Customer Display
F – Ethernet cable

12. Did you start the backup script on the BOS?