Setup Zebra Label Printer

Zebra ZD420 Set static IP address

1. Turn on the printer and press and hold the middle and right button – this will print a configuration sheet containing the IP address of the printer.

2. Open a browser and type in the IP address – this screen should open:

3. Press “Print Server Settings”

4. Press “Print Server”

5. When prompted for password enter the following: Username: admin, password: 1234

6. Press “TCP/IP Configuration”

7. Change the IP address to end with .29 (make sure this address is available) and change IP protocol to “Permanent” and then press “Submit Changes”

8. Click the “The unit must be reset for new values to take effect.” and then “Yes” button.

9. Done