Access Point

Ask the Onsite Contact Person

1. Ask the Onsite Contact Person if Access Points has been delivered and needs to be installed.
- If NO continue to the next topic of the guide.
- If YES follow the guide below.

Patching the Access Point

The Access Point should already be mounted in the store by a electrician.
The electrician should also clearly have indicated, which Patch Ports connects to a Access Point in the store.

2. Locate and unpack the Access Point Hardware.

3. Connect an Orange LAN Cable to port E3 on the ARUBA.

4. Patch the Orange LAN Cable from the ARUBA to the PoE Switch. – Do not use the Pre installed switch.
-The PoE switch is delivered together with the Access Point Hardware.
- It is very important to use the PoE Switch provided. Remember to connect the PoE Switch to power.

5. Patch another Orange LAN cable from the PoE Switch to the Patch Port / Back Office Patch Port, connecting to the Access Point.
- This Patch Port that connects to the Access Point in the store, should have been marked by the electrician mounting the Access Point in the store.
- Repeat step 5 if you have more than one Access Point to install.