Overlay settings

!SKIP this Topic, if you are installing a New Store or a Renovation.

Setting Overlay settings:

1. Start the POS program

2. When the POS program have opened close it again via the Task Manager
- Press the windows key and type in ‘‘task manager’‘ to gain quick access to the Task Manager

3. Go to C:\gd90 and open the file p_regpar.dat

4. Change the Line ZGUI to TOUCH

5. If the two lines below are not in the file add them in the file.
- ZGUI1:topx=0,topy=0,width=*,height=*
- ZGUI2:MousePointer=no

6. Make sure all lines are the same length

Go to the BOS

7. On the BOS PC go to C:\NCRBBOS and open p_regpar.def

8. Repeat from step 4

9. in the File p_regpar.def change the line
- ZZDK3:1400Y…. to
- ZZDK3:140YY….
to