ZEBRA
1.Locate and Unpack the Zebra Label Printer.
![]()
2. Connect the Label Printer to Power and LAN.
3. Make sure to connect the power and patch the LAN cable to the switch.
The switch can either be in a closer or loose somewhere:
4. Turn on the Zebra printer.
l;
p(banner important). We have to move/install the Epson Label printer from the back-office to the cash-desk
We have to install the Zebra label printer in the back-office.
EPSON
1. Locate and Unpack the Epson label printer.
2. Take the Epson Printer with power cable to the cash-desk.
3. Find a suitable place to place the EPSON printer. On a shelf at the counter, or possibly up on the desk itself.
4. Connect the power cable to a power strip at the bottom of the cash-desk..
5. Connect an internet cable to an ethernet socket or an switch/hub. (Note the number because we need it for later)
Post your comment on this topic.