In this section we will provide an example that will add a single module of each Mode to a project. This will require a combination of selecting the proper DAP from the Hardware catalog coupled with using the correct Profinet Name to achieve our desired result. The following chart lists the 6 modules we want to add to our project and the proper Device and Profinet Name syntax needed.
| Module Mode | I.P. Address | DAP from Hardware Catalog | Profinet Name |
|---|---|---|---|
| Full ZPA | 192.168.0.20 | ConveyLinx-Ai | conveylinxzpa-0-20 |
| Full PLC Controlled | 192.168.101.21 | ConveyLinx-Ai | conveylinxplc-101-21 |
| Reduced ZPA | 192.168.101.22 | ConveyLinx-Ai in reduced ZPA mode | conveylinxzpa-101-22 |
| Reduced PLC Controlled | 192.168.20.123 | ConveyLinx-Ai in reduced PLC mode | conveylinxplc-20-123 |
| Full ZPA with Merger | 192.168.0.21 | ConveyLinx-Ai | conveylinxzpa-0-21 |
| ConveyLogix Interface | 192.168.0.22 | ConveyLinx-Ai in PLC mode with ConveyLogix | conveylogix-0-22 |