In this section we will provide an example that will add a single module of each Mode to a project. This will require a combination of selecting the proper DAP from the Hardware catalog coupled with using the correct Profinet Name to achieve our desired result. The following chart lists the 6 modules we want to add to our project and the proper Device and Profinet Name syntax needed.
|DAP from Hardware Catalog
|Full PLC Controlled
|ConveyLinx in reduced ZPA mode
|Reduced PLC Controlled
|ConveyLinx in reduced PLC mode
|Full ZPA with Merger
|ConveyLinx in PLC mode with ConveyLogix