Calculating A Vector ~ Video

After Finding the Deflection Angle on the building with an angle, user must calculate and enter the vector FOR EACH LINE THAT DEFLECTS FROM ZERO DEGREES to complete the sketch.

A vector is expressed in two parts direction (angle/degrees) and magnitude (length).

IMAGINE the compass center where the last line ended.
GO COUNTER-CLOCKWISE to the quadrant of the drawn line.
ADD the quadrant you passed through PLUS the deflection angle (this example uses 8.3).
The answer is the vector angle.

This sketch was sketched clockwise. (Counter-clockwise sketches will be exactly 180 degrees different.)
User may want to figure all the calls, then enter them.