The spineROM scan is performed by taking readings from three different tests, in any order. You can cycle between the tests, and re-do them whenever you need. The most recent scan data will be used in the final report.

  • To begin, choose one several available tests in the following areas and hit connect to spineROM (Fig. 1) (Fig. 2):
    • Cervical
    • Thoracic
    • Lumbar
  • Have the patient hold their normal upright posture of the respective test selected.
  • Click the “Save Neutral Position” button (Fig. 3).
  • Now, have the patient perform the controlled specified range of motion, gently coming back to neutral, pausing, and then completing the extension and finishing by coming back to neutral.
  • After this motion, choose Finish Test (Fig. 4).
  • If satisfied, you can click any of the next tests, in any order.
  • Otherwise, you can hit “Retake Test” and redo the last completed test. This overwrites the undesirable result (Fig. 5).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5