NOTE: IMPORTANT NOTE: DO NOT PLUG ANY EQUIPMENT INTO A WALL CHARGER THAT ACCEPTS A USB CABLE. ALL WARRANTIES WILL BE VOIDED IF UNAUTHORIZED CHARGING EQUIPMENT IS USED WITH INSiGHT TECHNOLOGIES.
INSiGHT Scanning Technologies will arrive fully charged and ready for use. All instruments in the wireless INSiGHT Scanning Technology suite have internal batteries that have an average minimum battery life of 90 minutes of continuous use.
Battery level is viewable at the top of each respective instrument’s scan screen.
NOTE: You should not let your equipment fully lose charge. Charge your equipment when the battery level falls below 25%.
Each instrument except spineSENSE includes a cable that has a charging jack on one end and a USB connector on the other. Plug the charging jack into the instrument and the USB into a computer that is turned on to charge.
| Equipment | Equipment Name | Jack Location | Charging Status |
|---|---|---|---|
 |
neuroTHERMAL | Bottom of handle | Yellow LED light when charging. Green LED light when fully charged. |
 |
neuroCORE | Bottom of handle | “Charger Attached” on the unit’s screen. |
 |
neuroPULSE | Front of unit | Flashing green LED when charging, Solid green LED light when charged. |
 |
spineROM | Base Unit (Unplug from Satellite to charge) | Yellow LED light when charging. Green LED light when fully charged. |
 |
spineSENSE | N/A | The spineSENSE plugs into the neuroPULSE, and therefore, the neuroPULSE must be charged. |
