8.1.3.8. Minimum Flow

*Screen type = Value editing

*If Flowmeter parameter is configured with value 0 (flowmeter disabled), the Minimum Flow parameter will not be shown in the valve settings menu.

*Decimal places =1
Minimum value = 0.0 (parameter disabled)
Maximum value = 100.0 L / min

The Minimum Flow parameter allows the user to configure a minimum flow value in L/min, read from the flowmeter, with which the spraying operation will be performed. Even if the read rate in L/ha is momentarily higher than the target rate, the system will not allow the flow rate to fall below specified parameter value, thus meeting user’s application requirements.

The image below shows Minimum Flow parameter setting screen.

*Minimum Rate Speed ​​operates in conjunction with Minimum Pressure and Minimum Flow.

!When using Minimum Rate Speed, Minimum Pressure and Minimum Flow, the equipment may apply a higher rate than desired if the configured values ​​are overestimated, which may generate phytotoxicity and/or insufficient spraying.