The cable and monitor connectors IsoView they have labels that easily identify the correct connections that must be made. Just connect the connectors identified with the same inscription for correct installation.
Installing the monitor and antenna GNSS
The following figure illustrates the necessary connections of the set of items for installing the monitor IsoView and the antenna GNSS on the tractor.
| Item | description |
|---|---|
 |
Monitor IsoView |
 |
Antenna cable GNSS |
 |
Antenna GNSS |
 |
Monitor power cable |
 |
Connection cable with battery, with fuse holder |
 |
Battery 12 V |
Connecting the monitor to the spray cable
Monitor connections IsoView spray cable follow the diagram shown in the figure below.
| Item | description |
|---|---|
| |
Monitor IsoView |
| |
Cab spray cable |
| |
Spray cable extender |
| |
Implement spray cable |
Connecting the spray cable to the implement
There are several spray implement configurations, according to the valve model, number of sections, presence of regulating valve, general valve, flow meter and other sensors. For each configuration it is possible to have a different cable kit, using the items described in System Components.
The following are some examples of system configurations IsoView for spraying.
Example 1: Bar sprayer, low current 2-wire valves, connectors DIN 43650-B
- 72-wire Section Valves DIN 43650-B
- General Valve 2 wires DIN 43650-B
- 2-wire Regulating Valve DIN 43650-B
- 3-way Superseal Amp Flowmeter
| Item | description |
|---|---|
| |
Implement spray cable |
| |
Buffer connector for power input |
| |
9x Terminator cable for valves with model connector DIN 43650-B |
| |
7x Section 2 valve wires connector DIN 43650-B |
| |
Regulator Valve 2 wires connector DIN 43650-B |
| |
General Valve 2-wire connector DIN 43650-B |
 |
3-way Superseal Amp Connector Flowmeter |
 |
2x Buffer connector for valve outlet |
 |
4x Buffer connector for sensor input |
Example 2: Bar sprayer, high current 2-wire valves, Delphi connectors
- 92-way Delphi high current Section valves
- 2-way high current Delphi General Valve
- 4-way Delphi high current regulating valve
- Delphi 3-way flow meter
| Item | description |
|---|---|
| |
Implement spray cable |
| |
Power cable for 3-wire or high-current valves |
| |
Battery 12 V |
| |
11x Cable with relays for actuation of 3-wire or high-current valves |
| |
Terminator cable for valves with Delphi 4-way connector |
| |
10 x Valve terminator cable with 2-way Delphi connector |
| |
9x High current Delphi connector 2-way Section Valve |
| |
High current Delphi connector 4-way regulating valve |
| |
General Valve for high current Delphi connector 2 ways |
 |
Terminator cable for sensors with Delphi 3-way connector |
 |
Delphi 3-way connector flow meter |
 |
4x Buffer connector for sensor input |
Example 3: Atomizer for fruit growing, high current solenoid valves, and ultrasonic sensors
- 2Section valves with high current solenoid DIN 43650
- 2Ultrasonic sensors for fruit growing M12 5-way
| Item | description |
|---|---|
| |
Implement spray cable |
| |
Power cable for 3-wire or high-current valves |
| |
Battery 12 V |
| |
2x Cable with relays for actuation of 3-wire or high-current valves |
| |
2x Terminator cable for valves with model connector DIN 43650 |
| |
2x Section valve with high current solenoid connector DIN 43650 |
| |
2x Terminator cable for ultrasonic sensors with 5-way M12 connector |
| |
2x Ultrasonic sensor for fruit growing M12 5 way connector |
| |
9x Buffer connector for valve outlet |
| |
3x Buffer connector for sensor input |
