10.17. Changing the Sprayer Tank Level

*If the Flowmeter parameter is configured with value 0 (flowmeter disabled), the Fill Tank item will not be displayed in the Settings during navigation menu.

To change the tank level, select the item Tank Level in the Settings during navigation menu, accessible on the navigation screen via the settings button , and press the confirm button . The Value Editing screen will be displayed, allowing values ​​from 0 L to the configured value of the Tank Capacity parameter.

*To complete the process of changing the tank level, the machine must be stopped, and with the main sprayer switch off.

*The IsoView system does not have an analog tank level sensor, so the calculation is based on the initial level informed by the user when completing or changing the tank level, decreasing the amount of sprayer fluid that passed through the flowmeter. To obtain a calculation as accurate as possible, it is important to correctly perform the Flowmeter Calibration.