8.2. Work

*Screen type = Double list

• Field
• Event
• Operation
• Operator
• Culture
• Machine
• Guide Pattern
• Limit Pattern
• Implement
• Hitch Type
• Implement Sensor
• Implement Distance
• Lateral offset
• Overlap
• Antenna – Hitch Distance
• Hitch – Ground Contact Distance
• Hitch – Boom Distance

The Work parameter area, inside the settings menu, is a menu where the user can found the IsoView system settings concerning agricultural machine, operator, culture, various operation parameters, among other relevant work items.
To access the menu, the user must select the Work item and press the confirm button , as shown in the image below.

Then the Work settings menu will be displayed, as shonw in the images below.

The Work settings menu has some peculiarities, listed below.

• If the Operation is configured as Spraying, the Implement is shown with its value in meters, followed by the Number of Nozzles value between parenthesis. If the Operation is not configured as Spraying, the number of nozzles will not be displayed.

• If Hitch Type parameter is set to 3-point Hitch (Fixed), the Implement Distance is displayed in the menu.

• If Hitch Type parameter is configured as Drawbar, 3 other parameters are shown in the menu.
  • Antenna – Hitch Distance
  • Hitch – Ground Contact Distance
  • Hitch – Boom Distance

In the next topics, each areas that composes the Work settings menu will be detailed.