*Screen type = Value editing
*Decimal places = None
Minimum value = 0 (level alarm disabled)
Maximum value = Tank Capacity setting value
Level Alarm parameter defines the tank level below which the IsoView system must inform the user that the spraying fluid is ending. The alarm is carried out through visual and audible information on the navigation screen, presenting the message Low tank level at the Alert Board, and beeping intermittently.
*When the tank level reaches zero, the Alert Board message on the navigation screen will change to Empty tank and will keep beeping intermittently. The main spraying switch, however, will not be turned off automatically and the user must manually stop spraying operation.
!For some spraying pump models, such as diaphragm pumps, dry operation is not recommended. It is important for the user to monitor through system alarms the tank level, to avoid sprayer implement damage.
The Level Alarm parameter setting screen is shown in the image below.
*The IsoView system does not have an analog tank level sensor, so calculation is made based on the initial level informed by the user when filling up or changing the level of the tank on the navigation screen, decreasing the amount of fluid that passed through the flowmeter so far. In order for the calculation to be performed as accurately as possible is important that Flowmeter Calibration is done properly.
