The RTK base can be configured in two ways – Fixed Base or Moving Average.
Fixed Base
Fixed Base configuration assumes that the user knows the GNSS coordinates of the exact location where the antenna will be installed – for example, a georeferenced point, or a point already used previously. The coordinates must be entered correctly in Latitude and Longitude parameters.
Moving average
To configure a base as Moving Average, the user must determine the time used by the system to calculate the average, and enter the desired value in the Average Time parameter. This option is normally used when the GNSS is positioned over a point with coordinates still unknown.
Base Type parameter setting screen is shown in the following image.
Copyright © 2025 Agres Sistemas Eletronicos
—
Powered by 