8.1.6.1. Valves

*Screen type = Actuators diagnosis

*If Regulation Valve parameter is configured with value Not available, or if the IsoView system license does not have Flow Control feature – licenses ISO 31FS and ISO 31VS, the Target Rate configuration parameter will not be available for editing.

The Valves diagnosis area allows the user to individually check the correct operation of each of the spraying implement component valves. Valves actuation is performed manually, with the equipment outside its normal spraying operation and in a stationary position.

The following image shows the Valve diagnostics screen of a system example with main valve, regulation valve, and 9 section valves.

• The four arrow keys – , , , – should be used to navigate in the menu and select the valve to be activated.
• The increment button opens the selected valve, its status is displayed on the right side of the valve name as 1 for Main Valve or Section Valves, or OPEN for Regulation Valve.
• The decrement button closes the selected valve, its status is displayed on the right side of the valve name as 0 for Main Valve or Section Valves, or CLOSE for Regulation Valve.
• To stop Regulation Valve operation, press the valve off button .