Configuration Summary screen is displayed from all the internal areas of the Navigation menu, when creating or opening an event file, inside a new or existing field. The screen presents the user with the main current IsoView system settings that will be used at work. Some settings are editable, depending on how the event is being opened.
An example of the Configuration Summary screen is shown in the following images.
The list of items that composes the Configuration Summary varies according to the system settings. The following are the items available in the license ISO 30.
- Field – Name of the area in which the work will be performed.
- Always available in the Configuration Summary.
- Editable only in Create Field option.
- It is not possible to create a field with the same name as another that already exists in the memory.
- Event – Name of the operation that will be performed in the field.
- Always available in the Configuration Summary.
- Editable only in Create Field or Create New Event options.
- It is not possible to create an event with the same name as another that already exists in the memory.
- Guide Pattern – Guide lines pattern used during navigation.
- Always available in the Configuration Summary.
- Always editable.
- Guides Map – Shapefile file selection of the guides project.
- Available and editable only for:
- Create Field or Create New Event.
- Guide Pattern = Project.
- Available and editable only for:
- Operation – Defines the implement application to be used.
- Always available in the Configuration Summary.
- Always editable.
- Operator – Name of who will operate the agricultural machinery.
- Always available in the Configuration Summary.
- Always editable.
- Culture – Culture name of the area in which the agricultural operation is being performed.
- Always available in the Configuration Summary.
- Always editable.
- Implement – Agricultural implement width.
- Always available in the Configuration Summary.
- Editable only for Operation = Irrigation.
- Sections Number – Number of spraying implement sections.
- Available only for Operation = Pulverization.
- Not editable.
- Implement Distance – Distance between the GNSS antenna and the implement.
- Available only for Hitch Type = 3-point Hitch (Fixed).
- Not editable.
- Overlap – Overlap between navigation guides.
- Always available in the Configuration Summary.
- Not editable.
After reviewing the settings shown in the summary and pressing the forward button 
, the Information with confirmation screen will be displayed, the user must confirm to start navigation, as shown in the image below.
Pressing the cancel button 
, the system will return to the previous screen. If the confirm button 
is pressed, the navigation settings and data will be loaded and the Navigation screen will be displayed.
