English
- Português
- Español

IsoView 31

1

Table of Contents

IsoView 31

1
- IsoView 31 — 1

1. Introduction
- 1.1. What is the IsoView?
- 1.2. Licenses
2. System Components
3. Security Instructions
- 3.1. Recommended Use
- 3.2. Cleanliness and Care
- 3.3. Disposal of Components
4. Technical Data
- 4.1. IsoView Display
- 4.2. GNSS
5. Installation
- 5.1. Display Fixation
- 5.2. GNSS Antenna
- 5.3. Connections
- 5.4. Diagnosis
6. IsoView basics
- 6.1. Switching ON and OFF
- 6.2. Touch sensitive buttons
- 6.3. Configuration screens
- 6.4. Navigation screen
- 6.5. Guidance lightbar
- 6.6. Application button
- 6.7. Autopilot button
7. Information Menu
- 7.1. Satellites
- 7.2. Equipment
8. Settings Menu
- 8.1. Spraying
- 8.2. Work
- 8.3. Auto Steering
- 8.4. Fertilization
- 8.5. Memory
- 8.6. RTK Configuration
  - 8.6.1. Operation mode
    - 8.6.1.1. Base
    - 8.6.1.2. Rover
      - 8.6.1.2.1. Current Time
      - 8.6.1.2.2. Scintillation Forecast
- 8.7. Advanced
- 8.8. Orchard
9. Navigation Menu
- 9.1. Build Field
- 9.2. Open Event
- 9.3. Configuration Summary
10. Operation
- 10.1. Machine setting
- 10.2. Starting a Work
- 10.3. Ending a Work
- 10.4. Create a Guide
- 10.5. Position Adjustment
- 10.6. Pause/Resume Navigation
- 10.7. Lightbar setting
- 10.8. Create a Boundary
- 10.9. Main Sprayer Switch on/off
- 10.10. Toggle 2D/3D View
- 10.11. Brightness setting
- 10.12. Change Color Scheme
- 10.13. Display GNSS Signal Quality
- 10.14. Terrain Compensator setting
- 10.15. Performing an Irrigation
- 10.16. Sprayer Tank Filling
- 10.17. Changing the Sprayer Tank Level
11. Firmware Update
12. IsoFarm Platform
- 12.1. Create an IsoFarm account
- 12.2. Password recovery
- 12.3. Change IsoFarm Password
- 12.4. Import an event from IsoView
- 12.5. Viewing an event from IsoView
13. Problems and Solutions
14. Support and Technical Assistance
15. Warranty Terms
16. Glossary
17. Contact
18. Revision control

Download as PDF

8.2.6. Machine

*Screen type = Text editing

*Maximum text size = 40 characters

The Machine parameter defines the agricultural machinery model name in which the IsoView system is installed.

The figure below shows the Machine name parameter setting screen.

Copyright © 2025 Agres Sistemas Eletronicos — Powered by