Stand Alone Operation
A RaptorLinx-Ai-ST controller can be set-up to operate as a stand alone unit with simple hardwired 24V signals connected to instruct the controller to run a Raptor-Ai-ST MDR. EasyRoll+ software is used to configure the desired run profiles to be used for a given combination of run signals energized on the RaptorLinx-Ai-ST controller. Applied in this manner, the RaptorLinx-Ai-ST controller does not require any network connections to its Ethernet ports.
EasyRoll+ is offered as a download at no charge from Pulseroller.com. Download EasyRoll+