Raptor-Ai-ST Motor Roller /
Mounting Options
Motor End
Motor Type ⑥ – R
| ● Threaded M12 × 1.25 Shaft ● Includes M12 × 1.25 flange hex nut |
 |
 |
Idler End
Shaft &/or Custom Options ⑧ – P
| ● Spring Loaded Hex Shaft ● SW11 Hex Size ● Available for all interlocking options (Micro-V shown) |
 |
 |
Shaft &/or Custom Options ⑧ – T
| ● Internal Threaded M8 × 1.25 ● Includes M8 × 1.25 Bolt ● Available for all interlocking options (Micro-V shown) |
 |
 |