Raptor-Ai-ST Motor Roller /
General Specifications
| Raptor-Ai-ST | |
| Available Tube Diameters | 48.6 mm (1.9”) and 50 mm (1.97”) |
| Maximum Tube Length | 1000 mm (39”) |
| Motor Cable Length | 1000 mm (39”) |
| Motor Controller Connection | 4 Pin M8 |
| Speed Codes Available | 60, 75, 100, 120, 150, 200 |
| Washdown Model Available | Yes (Only up to 600 mm length) |
| Freezer Model Available | Yes |
| Mechanical Holding Brake Option | No |
| Ambient Temperature | -10 ~ 40º C (14 ~ 104º F) |
| Ambient Humidity | 10 ~ 90 RH (No Condensation) |
| Certifications | CE, UKCA, RoHS, IP54 UL Recognized to UL 1004-1 |
| Input Voltage | 24/48 VDC* |
| Nominal Power Output | 80W* |
| Rated Current | 2.5A |
| Starting Current | 5.5A Max |
| Maximum Motor RPM | 7500* |
| Minimum Motor RPM | 580 |
| Minimum Duty Cycle | 0.5 sec ON / 0.5 sec OFF |
| Continuous Operation | No overheat at rated load/current |
| Compatible Controls | RaptorLinx-Ai-ST |
* Performance is derated when input is 24VDC