Fuji Frenic LM2A

*Before starting, follow the Installation and Start-up guide

1. Connections available for GSR

RS232 option	USB option
FUJ Frenic LM2A Toolkit RS232	FUJ Frenic LM2A Toolkit USB

1. Configure the Fuji Frenic LM2A Variator by assigning it the variables as shown in the pictures bellow:

2. Connection to frequency inverter

2. Remove the control terminal and remove the indicated screw.

3. Remove the front cover, locate the TERM5 connector and connect it as described.

4. According to the type of connection in GSR use one of the ports below

Connection by RS-232	Connection by USB

5. Make the connection

Connection by RS-232	Connection by USB

*Follow the next steps in Platform use