The rules are categorized according to the following icons:
– Error: Detected malfunction in the elevator operation, technician intervention is necessary for resolution.
– Usable: Special elevator events that do not impact its regular operation. They only inform that they are currently active.
– Normal: Non-assistive alert as it is temporary, caused by an event that disappears on its own when the situation that triggered it is resolved.
Rule Type | Rule Name | Description |
---|---|---|
Car movement problems | Problems have been detected during car movement on a journey. | |
Car position problems | Car position problems. | |
Car stop zone error | Car is stopped in an unusual zone between floors. | |
Contactor errors | Contactor common error. | |
Door error | The electronic board controlling the car doors gives an error. | |
Door time protection open | The doors have not opened within the configured time after the door open command (too fast or too slow). | |
Drive error | The elevator has a malfunction that prevents movement and travel from being correct. | |
Generic error | Common generic error. | |
Misconfiguration | Controller misconfiguration. | |
Out of range of temperature | Out of range temperature (above or under the expected limits). | |
Power errors | Common power error. | |
Relay unexpected state | Relay is in an unexpected state. | |
Security chain interrupted | Security chain interrupted during the trip. | |
Software error | Software error (triggered watchdog, reboot, etc…). | |
Trips count limit exceeded | Number of trips is above the maximum established. | |
Trip time limit exceeded | Time of trips is above the maximum established. | |
Up final limit switch | Up final limit switch was activated. |
Rule Type | Rule Name | Description |
---|---|---|
Door hold | Door hold button is used to hold the door open for a desired period (normally three to five minutes) for loading goods, baggage, bed or stretcher or user interrupts the door sensor. |
Rule Type | Rule Name | Description |
---|---|---|
Overload | Overload common error. | |
Fire detected | Smoke detected or fire alarm activated. |