The rules are categorized according to the following icons:
– Error: Detected malfunction in the elevator operation, technician intervention is necessary for resolution.
– Normal: Non-assistive alert as it is temporary, caused by an event that disappears on its own when the situation that triggered it is resolved.
Rule Type | Rule Name | Description |
---|---|---|
Calibration error | Common calibration error. | |
Car stop zone error | Car is stopped in an unusual zone between floors. | |
Contactor errors | Contactor common error. | |
Door error | The electronic board controlling the car doors gives an error. | |
Drive error | The elevator has a malfunction that prevents movement and travel from being correct. | |
Generic error | Common generic error. | |
Misconfiguration | Controller misconfiguration. | |
Out of range of temperature | Out of range temperature (above or under the expected limits). | |
Power errors | Common power error. | |
Security chain interrupted | Security chain interrupted during the trip. | |
Trip time limit exceeded | Time of trips is above the maximum established. |
Rule Type | Rule Name | Description |
---|---|---|
Overload | Overload common error. | |
Maintenance | Maintenance common status. |