Relay USB

Relay USB products are sold in two versions, with one or two relays and can be used as accessories for GSR – GSM Smart Router.

Inside the box

Connection

1 relay version	2 relays version
NO: Normally Open contact	COM2: Common contact relay 2
COM: Common contact	NC2: Normally Closed contact relay 2
NC: Normally Closed contact	NO2: Normally Open contact relay 2
–	COM1: Common contact relay 1
–	NC1: Normally Closed contact relay 1
–	NO1: Normally Open contact relay 1

Platform configuration

1. Access the platform Net4Machines Smart Control

2. Locate the facility


3. Add a new Element


4. Add a reference, select type Relay and choose 1 or 2 relays model, lastly press Create

5. Drag the element to GSR


6. Follow the steps described in the wizard, connect the relay USB and once the process is completed successfully, press Close

7. Press the element, Control section and Load Console


8. Once the connection is established, use the buttons ON and OFF