All ATevos required to share load on the same dc bus must be connected to the same network. The network will consist of a twisted pair cable with ground. The Serial Communication Adapters (A13) on each ATevo must be parallel wired, point-to-point as follows:
| Wiring for Forced Load Sharing | |||||
|---|---|---|---|---|---|
| Cable | Wire | ATevo-A | ATevo-B | ||
| 1 | (-) | RA(-) | RA(-) | ||
| (+) | RB(+) | RB(+) | |||
| GND | GND | GND | |||
Last modified:
2 August 2023