Remote sensing:

  • Compensates for voltage drop in dc wiring between ATevo and the battery.
  • Directly monitors battery or dc bus voltage. The front panel meter displays actual voltage at the battery or dc bus.


To wire ATevo for remote sensing, install twisted-pair cabling from the remote sense terminals to the battery terminals or dc bus. ATevo control circuitry measures dc voltage at the battery terminals and controls charger output to maintain battery voltage at the desired float or equalize voltage.

ATevo cannot protect against short circuits in remote sense wiring. Install a 1.0A fuse at the battery or dc bus end of each remote sense cable.
Last modified: 27 September 2023